Check Out Avishtech on the EEcosystem Podcast!

January 2023 – Avishtech’s founders and industry expert Lee Ritchey sat down with Judy Warner for her EEcosystem Podcast.

Electronics and Electronic Materials Consulting and Testing Services
Avishtech’s lab can provide state-of-the-art testing services for electronics and electronic materials. All analysis is carried out by our experts with deep knowledge in Materials Science and extensive backgrounds in Printed Circuit Boards and Printed Circuit Board materials, and every test comes with a report containing both data and interpretations. Best of all, reports are turned around very quickly, most typically within 24-48 hours of receipt of your samples!
  • Press Cycle Design/Development

    Please email us!In stockThis service is to develop or improve a press cycle to optimize for a particular set of properties (e.g. loss, Tg, expansion), to counteract unwanted behavior (e.g. warpage, excessive dimensional movement), or to improve productivity.
  • Fourier Transform Infrared Spectroscopy

    Add to cartIn stockFourier Transform Infrared Spectroscopy (FTiR) is an optical method used to characterize material composition with respect to functional groups. It is often used for quality control and comparison testing to verify that two samples have the same composition, as well...
  • Thermogravimetric Analysis

    Add to cartIn stockThermogravimetric Analysis is a thermal measurement method used to measure weight loss and decomposition temperature of a material. Standard Cost reflects Temperature Range of 50°C to 500°C at 10°C/min – please contact us for different temperature range. Price reflects a...
  • Differential Scanning Calorimetry

    Add to cartIn stockDifferential Scanning Calorimetry is a thermal analysis technique used to measure various properties, including Glass Transition (Tg) and Chemical Cure Kinetics behavior. Standard Cost reflects Temperature Range of 50°C to 300°C - please contact us for different temperature range. Price...
  • Rheology

    Add to cartIn stockRheology is a method that observes flow and deformation behavior in torsion of a solid-like or liquid-like material to measure visocelastic properties. Standard Cost reflects a Temperature Range of 90°C to 160°C (or the temperature at which the material gels)...
  • Dk/DF Testing – In-Plane (X/Y)

    Add to cartIn stockDielectric property testing is used to determine the Dk and DF of a dielectric material. This test provides these values for the in-plane Dk and DF at 10 GHz. Price includes measurement of a single sample.
  • Thermomechanical Analysis (TMA) – Z Expansion

    Add to cartIn stockThermomechanical Analysis is a technique for measuring the thermomechanical expansion behavior of a material. This service uses an Expansion probe to measure thermal expansion in the Z-direction (thickness direction). Standard Cost reflects Temperature Range of 50°C to 270°C - please...
  • Dynamical Mechanical Analysis

    Add to cartIn stockDynamical Mechanical Analysis is a mechanical measurement method used to measure mechanical response to stress. This test can be used to measure flexural modulus and glass transition temperature using either Single Cantilever or Dual Cantilever modes, or to measure tensile...
  • Thermomechanical Analysis – X/Y Expansion

    Add to cartIn stockTheromomechanical Analysis is a method used to measure thermomechanical behavior of a material - this service is for measurement of thermal expansion in the X and/or Y directions (in-plane). Standard Cost reflects Temperature Range of 50°C to 220°C at 3°C/min...